ExtremeNode Processor Blade Unit
Microprocessor
- Intel® Pentium® 4 Processor supporting
3.2 and 3.4GHz microprocessors
- Supporting 800 MHz system bus speed
- 512-KB and 1MB L2 Advanced Transfer Cache
- Integrated caches include 12-K micro-op trace cache and
8-KB L1 data cache in addition to L2 cache memory.
- Featuring the Intel® NetBurst microarchitecture
- Compatible with existing Intel® architecture-based software
- Streaming SIMD Extensions 2 (SEE2) Instructions
- 128-Bit Floating Point Port
Memory
- Four 184-pin DDR SDRAM DIMM sockets
- Support for DDR333 and DDR400 Non-ECC memory Support for up to 4GB of system memory
Chipset
- Intel 875P chipset
- Intel 82801EB(ICH5) South Bridge
- Winbond W83627HF LPC/IO ASIC
Graphics and displays
- ATI RAGE XL PCI controller 8 MB frame buffer
Network Interface
- 1 x Integrated Intel 82547E 1 GigaBit Ethernet
controller (RJ-45)
- 1 x Integrated Intel 82562EM 10/100 Mbps LAN controller (RJ-45)
Expansion Slots
- One 5V 33 Mhz PCI bus add-in card connector per ExtremeNode
Unit
Peripherals Interface
- Eight USB 2.0 Ports (2 rear connectors and 3 headers)
- Two 9-pin serial ports (one rear connector and one header)
- One 25-pin ECP/EPP/SPP parallel port header
- One PS2 Keyboard Port
- One PS2 Mouse Port
- Two Parallel ATA IDE interfaces with UDMA 33, ATA-66/100
support
- Two SATA IDE interfaces support IDE RAID 0, 1, 0+1
- One floppy disk drive interface
|
Hard Disk Drives
- One Samsung SP1203C 120GB SATA-150 IDE hard drive 7200 RPM
and 8 MB Cache memory
Internal Storage Bays
- Two 3.5" internal hard drive bays (One Empty)
Floppy Drive
- External USB Floppy Drive (Optional)
CD-ROM Drive Bay
- External USB CD-ROM (Optional)
Power Supply
- Line voltage: 100-240V AC. Voltage Auto sensing Power Supply.
- Frequency: 50Hz to 60Hz, single phase
- Maximum Wattage: 250 Watts
Environmental requirements
- Operating temperature: 5° C to + 55° C
- Storage temperature: -40° C to 70° C
- Relative humidity: 5% to 95% non condensing
- Maximum altitude: 10,000 feet
|
