| |
ExtremeNode™ 6400
Dual AMD Opteron™ Blade Node
Microprocessor
- AMD Opteron™ processors supporting
1.4, 1.6, 1.8, 2.0, 2.2 and 2.4 GHz
microprocessors
- Support Dual uPGA 940-pin ZIF sockets
- Supporting 800 MHz system bus speed
- 1MB L2 Advanced Transfer Cache
- Integrated 128-bit Memory controller
- Compatible with existing Intel® architecture-based
software
Memory
- Eight 184-pin DDR SDRAM DIMM 2.5v sockets (Each processor
controls 4 memory)
- 128-bit DDR memory bus
- Supports PC3200 / 2700 / 2100
ECC/Registered memory
- Supports up to 16GB of registered DDR memory
Chipset
- AMD-8131™ HyperTransport™ PCI-X Tunnel
- AMD-8111™ HyperTransport™ I/O Hub
- Windbond™ W83627HF Super I/O ASIC
- Analog Devices ADM1027 Hardware monitoring IC
Graphics and displays
- ATI RAGE™ XL PCI controller 8 MB frame buffer
Integrated Network Controller
- 2 x Integrated Broadcom BCM7504C dual-channel Giga
bit Ethernet (RJ-45)
Integrated SATA Controller
- Silicon Image SiL3114 SATA RAID Accelerator
- Supports SATA 1.1 specification
- 4 X SATA-150 Connectors
- Supports RAID 0, 1, 10
Integrated Enhanced IDE Controller
- Dual IDE channels
- Supports up to four EIDE devices
- Supports for UDMA 33/66/100/133 IDE drivers and ATAPI
compliant devices
System Management
- Seven 3-pin fan headers with tachometer monitoring
- Five fan headers with (PWM) speed control
- One 2-pin Chassis Intrusion header
- Temperature, voltage and fan monitoring.
Expansion Slots
- One 3.3V 66 Mhz PCI-X bus 90 degree riser card (optional)
Front Accessible Ports
- Stacked PS/2 mouse and keyboard ports
- Stacked two USB v1.1 Ports
- One 9-pin UART serial port
- One 15-pin VGA port
- Two RJ45 10/100/1000 Base-T ports with activity LED
- Power Connector
- PCI-X Slot
BIOS
- AMI BIOS 8.0 on 4 Mbit LPC Flash ROM
- Supports APM 1.2 & APCI 1.0
- Power Management S1, S4 and S5 Support
Power Supply
- Input: 110/220V auto sensing
- Output : 400 Watts max
Hard Disk Drive
- Supports SATA-150 120, 160, 200 and 250MB Hard Drive
- 1.5 Mbits/sec transfer rate
- Supports up to one 3.5" hard disk drives
- 2nd 3.5" hard drive bay optional
|
|